Preventative Care

  • Gorilla Wall Braces
  • The Carbon Hold System

What is the Gorilla Wall Brace System?

The Gorilla Wall Brace System is a revolutionary solution that will not only repair bowing and buckled walls, but it will actually prevent any future structural problems as well. Guaranteed!

What are the Benefits?

The Gorilla Wall Brace system has numerous benefits. For example:

  • Allows users to avoid the high cost of excavation
  • Pushes off of 3 floor joists, reducing pushing stress
  • Quick installation
  • It can repair already bowed and buckling walls
  • It pressure can easily be controlled to fit the need
  • It will increase structural integrity
  • An all-in-one solution!

 

 

 

How Walls are Made Secure

Bulging wall repair begins by fastening the floor bracket with heavy duty screw anchors to the basement floor, then attaching the pushing rod bracket to the floor joist every 4 ft. to properly do the wall bracing job. The tube bracket holders are attached to the two neighboring floor joist, utilizing 3 floor joists, giving additional pushing power in the home foundation repair.

The basement wall repair is made to push the buckling wall back, when the pushing rod applies pressure to the wall brace. Applying continued pressure on the buckled wall, over a period of time, the bulging wall will be moved back. In cases of severe bowing wall damage, foundation repair can be made to the basement walls by installing the wall bracing and running a 6 inch trenching machine or a narrow back hoe outside of the moving wall. This allows the buckling walls to be pushed back by the installed wall braces and the bowing wall will be straightened the same day.

The Carbon Hold System is permananent and guaranteed to work. It is a solution that can fix cracked walls and bowed foundation walls with the most minimal effect on the look of your basement. At ten times the strength of steel, it can not only be used to repair bowing walls, but also cracks in a basement.  
This system can be applied to almost any concrete wall. In cases where wall movement is a concern, the Carbon Hold system will structurally isolate any movement in the wall so that the crack will not move and reopen a new leak. Once it is applied, the crack repair system can easily be painted over. 

When a system like this is installed, it is vitally important that the fibers are securely bonded to the wall. The Carbon Hold system is a 12" wide mesh that has a substantial surface area to bond to the foundation wall.  This makes a stronger bond than almost any other system and lessons the potential of the epoxy bond being pulled off.  Guaranteed!

The Carbon Hold crack repair method seals, strengthens, and stablizes leaking cracks. It provided structural integrity to the crack, giving homeowners the peace of mind that the crack will not leak due to wall movement. 

Advantages to Carbon Hold

  • Cost Effective
  • Less disruptive than other methods
  • Mesh is fully encapsulated in epoxy
  • Incredibly strong
  • Can be painted
  • Guaranteed